Model 19: 416z vs. GPA 416-8C

**badtoby** · June 28th, 2013, 02:22 AM

Will Z's mount to a 19 cab?

**Old Guy** · June 28th, 2013, 05:12 AM

Originally Posted by badtoby

Will Z's mount to a 19 cab?

Depends- z can have old or new frames. Old frames need rear mount or some manipulation to front mount.

**les winter** · June 28th, 2013, 06:07 AM

I built the enclosures and made the front baffle removable, so it can be modified or replaced as needed. I have decided to build 16-ohm versions of the model 19 x/o and use the 416z woofers. I appreciate all the input.
thanks.

**voice of the theater** · June 28th, 2013, 10:46 AM

Originally Posted by les winter

I built the enclosures and made the front baffle removable, so it can be modified or replaced as needed. I have decided to build 16-ohm versions of the model 19 x/o and use the 416z woofers. I appreciate all the input.
thanks.

I owned 416z woofers in my 846a Valencias. They are great sounding woofers--please keep us posted on your progress!

**rontec** · July 1st, 2013, 10:24 PM

Originally Posted by les winter

I built the enclosures and made the front baffle removable, so it can be modified or replaced as needed. I have decided to build 16-ohm versions of the model 19 x/o and use the 416z woofers. I appreciate all the input.
thanks.

Good move! I think you can make a decent set of speakers with your components. You might have to be a little creative mounting the 511b's as well. The HF drivers might want to protrude out the back of the cabs a bit. Also you might want the crossover point a little lower than the 811b's on mod. 19's. You'll have fun getting there! Keep us posted on your progress.